If you have a fire or water emergency, please call us now at (912) 285-0724

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

Mold At Work Is Bad For Business

8/16/2021 (Permalink)

Three green SERVPRO work trucks are shown Contact SERVPRO of Waycross, Hinesville & Douglas for mold remediation services. SERVPRO of Waycross, Hinesville & Douglas (912) 285-0724


If you are concerned about mold in the workplace you are not alone. In fact the Occupational Safety and Health Administration has released a significant amount of guidance. Here is a glimpse at some of the key elements about mold in the workplace.


Moisture control is the key to mold control. When water leaks or spills occur indoors, act promptly. Any initial water infiltration should be stopped and cleaned promptly. A prompt response (within 24-48 hours) and thorough clean- up, drying, and/or removal of water-damaged materials will prevent or limit mold growth.


Mold prevention tips from OSHA include:


Repairing plumbing leaks and leaks in the building structure as soon as possible.


Looking for condensation and wet spots. Fix source(s) of moisture incursion problem(s) as soon as possible.


Preventing moisture from condensing by increasing surface temperature or reducing the moisture level in the air (humidity). To increase surface temperature, insulate or increase air circulation. To reduce the moisture level in the air, repair leaks, increase ventilation (if outside air is cold and dry), or dehumidify (if outdoor air is warm and humid).


Keeping HVAC drip pans clean, flowing properly, and unobstructed.


Performing regularly scheduled building/ HVAC inspections and maintenance, including filter changes.


Maintaining indoor relative humidity below 70% (25 - 60%, if possible).


Venting moisture-generating appliances, such as dryers, to the outside where possible.


Venting kitchens (cooking areas) and bathrooms according to local code requirements.


Cleaning and drying wet or damp spots as soon as possible, but no more than 48 hours after discovery.


Providing adequate drainage around buildings and sloping the ground away from building foundations. Follow all local building codes.
Pinpointing areas where leaks have occurred, identifying the causes, and taking preventive action to ensure that they do not reoccur.

Our Team Is Here To Help

If your home or business has a mold problem, we can inspect and assess your property and use our specialized training, equipment, and expertise to remediate your mold infestation.


SERVPRO of Waycross, Hinesville & Douglas specializes in mold cleanup and restoration, in fact, it’s a cornerstone of our business. Our crews are highly trained restoration professionals that use specialized equipment and techniques to properly remediate your mold problem quickly and safely.


What to Do:


Stay out of affected areas.


Turn off the HVAC system and fans.


Contact SERVPRO of Waycross, Hinesville & Douglas for mold remediation services.

SERVPRO of Waycross, Hinesville & Douglas (912) 285-0724

Other News

View Recent Posts